I have seen it on state laws , most states designate no recap on steer axle, tires must be new and at least 4/32" tread depth, same size and type on both sides of the axle. I am pretty sure it is a Fed DOT requirement since just about all of the state CDL books are copied word for word from Fed DOT.
Make Recap Tires Illegal
Discussion in 'Trucking Industry Regulations' started by jamwadmag, Feb 6, 2007.
Page 4 of 25
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The only regulation that I can find that deals with recapped tires on steer axles is 393.75(d). This regulation only address the issue as it relates to a bus. 393.75(e) deals with regrooved tires.
It is my understanding that running recapped tires on the steer axles is LEGAL (except for a bus). If you know of something different please share with me the exact regulation. -
Two years ago I was in the labor room waiting the arrival of my grandbaby in Phoenix. My son was running 2 hours late after he had phoned us saying he was headed out the door. He finally showed up at the hospital with glass in his hair, on his clothes, and small cuts all over. An 18 wheeler had thrown a piece of tread right through the Jeep windshield he was driving. They can't be that safe.
-
-
I know it's a felony here to have a steer tire patched, and fairly sure it's a felony to have a re-tread on the front too. I had asked the owner of the tire repair about it because the company wanted them to put a patched tire on. I didn't want anything but new tires on front.Attitude:) said: ↑Two years ago I was in the labor room waiting the arrival of my grandbaby in Phoenix. My son was running 2 hours late after he had phoned us saying he was headed out the door. He finally showed up at the hospital with glass in his hair, on his clothes, and small cuts all over. An 18 wheeler had thrown a piece of tread right through the Jeep windshield he was driving. They can't be that safe.Click to expand...
-
air dude said: ↑My mistake! You are correct! Most drivers seem to think that it's illegal to run recaps on a steer axle and this is simply not the case unless you are driving a bus.prodriver said: ↑Yes I am very sure. I did not state that there is any regulation or law requiring it. I was referring to those drivers ro O/O that take safety seriously. Who would put a retread, with a questionable and unverifiable history, on thier steer axle? Some of those carcasses are too old, and like most materials can suffer from fatigued bonds that reduce its ability to recover from shock. I know that retreads can be very reliable and the technology involved produces a very good product. I have nothing at all against the use of retreads. I don't care who I offend though when I say 'Only a complete idiot uses retreads on the steer axle'
What might be a good idea is this or some variation. Why not stamp indelibly on the outside of the recap each time it is remanufactured. Place a limit on the number of times a carcass can be restored. Would raise prices only slightly since one could no longer recover a 7 time baldy. Make it eligible for recap up to like 4 or 5 times (or whatever is a safe amount) and display the date of the original manufacture.JMOClick to expand...Click to expand... -
I've had plenty of virgin rubber blow out. I keep all my tires in good shape and properly inflated... I wasted alot of $$$ when I first became a O/O because I overlooked my tired and blew out alot of good ones. Still have blowouts now that I keep a watchful eye on them. I won't run a recap for my own personal reasons. I've had virgin rubber come apart just like a cap too though.
-
i know in montana, you can have recap's on the steers as long as it is only an intrastate truck, but i wouldnt trust them enuff to drive it
that being said, the recaps i just put on my drives and trailer, i have had no problems with as of yet,around 8k miles, and belive me i havent been all that gentle ( i winched one the other day....), they dont lose any air yet and no tread seperation issues....the out fit im leased to swears by them
but during times with previous employers...i have destroyed many tires....recap's and virgin's....all thru "normal" wear and tear for the conditions i was in...seriously you should see some of the places they expect you to put a belly or side dump...lol -
Brickman said: ↑prodriver said: ↑Common sense.Click to expand...
Common sense is too broad of a statement. If not, then there would be no need for federal regulations, laws, etc. I once saw a mechanic welding without a hood. Common sense? It was to him but to the majority of welders I know it's stupidity.
Does this mean that common sense and stupidity are the same? It is to some people!Click to expand...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 25
Related Categories
-
FMCSA email regarding Motus?...
TheLoadOut posted Dec 4, 2025 at 11:43 AM -
NEW NC booting law
Numb posted Dec 2, 2025 at 12:19 PM -
Medical card question
Dna Mach posted Nov 28, 2025 -
New regs-stress test for annual...
omaharj posted Nov 24, 2025 -
REPAIR SHOP LAWSUIT HOW TO FIND...
eysyey posted Nov 23, 2025 -
I bought a rollback!
Dino soar posted Nov 19, 2025 -
Raising GVW on a straight truck...
Dino soar posted Nov 10, 2025 -
New CDL driver
justanotherdriverhere posted Nov 10, 2025 -
Split break question
Dna Mach posted Nov 7, 2025 -
Failed DOT Med Cert for whisper...
Mach posted Nov 4, 2025
Loading...
Recent Threads
-
Anyone see an issue with ELP...
drvrtech77 posted Dec 7, 2025 at 7:43 PM -
Doozy on Arkansas I-30 WB
Flat Earth Trucker posted Dec 7, 2025 at 7:03 PM -
2 More Companies Shutting Down
7speed posted Dec 7, 2025 at 6:31 PM -
I need help and advice
Iemontel posted Dec 7, 2025 at 5:43 PM -
10 Roads closing
omaharj posted Dec 6, 2025 at 11:49 PM -
Ex-Premier League goalkeeper...
Chinatown posted Dec 6, 2025 at 10:41 PM -
Companies hiring....
Commuter69 posted Dec 6, 2025 at 8:01 PM -
How would you run this load?
JForce28 posted Dec 6, 2025 at 4:08 PM -
Three killed fleeing Whitfield...
Flat Earth Trucker posted Dec 6, 2025 at 1:55 PM -
Driver reports facility to OSHA...
bullhaulerswife posted Dec 5, 2025 at 9:53 PM
Loading...