How hard is it to get ahold of the 6NZ file? I have someone that can flash it, I just want the stock 550 6NZ file.
6NZ File
Discussion in 'Trucks [ Eighteen Wheelers ]' started by NoLuckCanuck, Jun 30, 2012.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Its pretty easy if you know the right people. I'm just trying to figure out if you know someone who can flash it, why don't they have the file already?
little cat 500 Thanks this. -
You're absolutely right. I misunderstood him he has files. he just needed the file name that would best work. I was under the impression that any 550 6NZ flash would work on the bridge/MBN ECM but he says some are better then others. So if I may redo my question. which flash file would be best suited. And should I mess with the trim codes or leave them till I manage to afford the new turbo? If so which should I use? I currently am running the fuel temp mod and an air pressure regulator on my boost sensor as well as a restrictor on my wastegate line. Once I flash Ill only keep the fuel temp (so very impressed with that one)
-
By the way thanks to everyone on this site for the mods Ive found here. I appretiate all the help as does my fuel card!
-
Use the oldest 550hp 6NZ file he has and if you want little extra power use a brakesaver file. I wouldn't recommend you change the trim codes, ever new turbo or not.
NoLuckCanuck Thanks this. -
The MBN ECM limits what file you can use. The part number of the ECM is 240-5303 which isn't compatible with the old 6NZ files. Use any file that is for a 6NZ53999 or lower serial number, but has a newer release date for the best programming in the file. The injection timing or emissions won't change from a file written in 2002 to one written recently with these files. The changes in the files during this time frame have to deal with diagnostics and communication between the laptop and the trucks other computers, not emissions.
NoLuckCanuck Thanks this. -
What exactly is a brakesaver file?
-
-
-
Mr haney, can you reply to my question when you have time, sir. Thank you. What difference would i see in an older 550 file? Current one is 6TS 14926 set at 600hp. A friend said he used 601 hp 5ds file.
Cat ecm file for 550 5EK
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2