Turbocharger sideplay

Discussion in 'Trucks [ Eighteen Wheelers ]' started by 66truck, Jul 11, 2012.

  1. 66truck

    66truck Light Load Member

    136
    29
    Nov 7, 2008
    ohio
    0
    Does anyone know how much sideplay is acceptable for turbo shaft? I can move mine about a 1/16" on my 12.7 60 series .
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. bender

    bender Road Train Member

    2,105
    1,360
    Jul 20, 2010
    Don't Kid Yourself
    0
    As long as it spins free and there's no rotor to housing interference your fine.
     
  4. vze326ff1

    vze326ff1 Bobtail Member

    13
    0
    Jul 10, 2012
    0
    sideplay is norm on a turbo. Alot of up and down play is not good. does the turbine hit the housing when you turn it????
     
  5. 66truck

    66truck Light Load Member

    136
    29
    Nov 7, 2008
    ohio
    0
    Nothing hits, just didnt think there should be that much movement.
     
  6. Mr. Haney

    Mr. Haney Road Train Member

    2,693
    2,041
    Dec 17, 2008
    0
    a turbo can have as much as 0.030" of side to side, up and down play and be considered normal depending on the make and specs of the turbo. End to end play is minimal, otherwise the wheels will hit the housings. If nothing is hitting and you don't have any signs of an oil leak at the bearing housing seals, leave it alone, unless you want to spend money for no reason
     
    beltrans Thanks this.
  7. 66truck

    66truck Light Load Member

    136
    29
    Nov 7, 2008
    ohio
    0
    Thanks for your input Mr.Haney , we'll leave it alone.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.