my n14 freightliner wont start

it had a bad starter which i could smell burning so i change it it started before that day.it was leaning to passenger side so i balanced the fuel out and it still dont start my fuel pump dont have any power going to it i also run a straight power to it and no starting could the starter burn the ecm

 

yes the batteries were disconected and i made sure of the wires because i use wire ties to keep the wires from each terminal togather .i tried spraying it also.i wanted to get someone to read my ecm but they didnt show up,it wasnt starting with the old starter when i was getting ready to leave.the old starter was turning over ok but it was burning so i decide to take it off

 

you said somthing about the ecm power supply fuses in the freightliner where would you find those fuses

 

i did recheck the wireing like three times one time when i took it off to so i understand it and 2 times after putting it back i can still check against also appears that the fuel pump aint working

 

i have circuit breakers just in front of the gear shifter

 

is there an ecm reader out there for these trucks which is not more than $500