KW has glider kits. GET ONE! No regen with your PTO time unloading, no DPF filter to plug,no DEF to buy, not to mention the weight of all that crap. Get a single locking 23,000# drive axle on the back, the "front drive" should be a liftable axle. I would put a 6NZ CAT in it, but a C12 or C13 would be lighter. Mr Haney could tune them, so power isn't an issue. I would get drum brakes with centrifuse drums on all axles. They're lighter and last longer. I don't like super singles but would consider them for your operation. Steel frame with aluminum cross members. I like Meritor axles, Eaton Fuller 18 speed. I think Paccar is sharing suspensions now, I would get Pete's Air Trac suspension, great traction and very stable.
Need spec help for an OTR KW
Discussion in 'Trucks [ Eighteen Wheelers ]' started by silentpardner, Sep 2, 2012.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
If 3.55 gears work with a ten speed, try 3.08 with an 18 speed and leave it in 17th gear unless your empty or cruising at 80mph. Tall 22.5's are the same height as LP 24.5's. I suck at posting links but these are the websites I use to spec a truck. www.cummins spec.com/site/gearing. Also SAE Holland for the fifth wheel will let you compare weights and heights. Remember that an 18 speed is .73 to 1 in 18th, .86 to 1 in 17th. If you use the eaton website it will tell you that they don't make a transmission with .86 to 1 so you will have to type that in manually. You will find that the forementioned tire sizes and the 3.08 will compare to 3.55 1/2 gear down.
If I were specing a dirt truck, I would go with 3.25 gears as it matches with 3.70's If you like 3.55 go with 3.08 If you never need " granny" or "crawl" gears, some guys are going with 2.64's and running in 16th gear. -
I have a 72 Aerocab flattop I can stand up I'm 6' tall. I would never get the tall aerodyne unless I were pulling a van or reefer. If you get the aerocab with the couch that makes into a bed, you can't get a back window and you lose alot of underbunk storage.
-
I have a 72 Aerocab flattop I can stand up I'm 6' tall. I would never get the tall aerodyne unless I were pulling a van or reefer. If you get the aerocab with the couch that makes into a bed, you can't get a back window and you lose alot of underbunk storage.
-
11R 22.5 tire is the same overall diameter of lo pro 24.5 the tractor will not sit any lower than the trailer.
-
So, what about this truck? It's for Sale!!!
2012 KW T800 62" Sleep O/O spec
Cummins ISX15 450 HP w/Eaton 10 sp
3.55 gears with AG 400L suspension
24.5 on all aluminum
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3