PRIME drivers...What's your 20?

Anything about flatbeds and backing?

You might have a tailwind tomorrow.

 

The TA in Rockwall used to be a total pit out in the middle of nowhere! Noticed there was a Japanese hibachi restaurant and a steak place too as I left. Just delivered in Ft Worth (very quick unload at US Cold Strg,) and am parked on the street for the night. Heh! Had a "helpful" Central Refrigerated guy decide it was time to give backing pointers to some poor Prime driver. He made sure I knew I could "use all the space" and not to be afraid because "I wasn't being tested."


Really? WOW!! Is that how ya do it??? Amazing!!!!

 

Unloading at dcp in mass.

 

Still in SPRIMO, Got the dpf cleaned and a few other things corrected. Student is all practiced up and testing tomorrow, Expecting a good outcome

 

T/A Aroura Oregon

 

Petro, N. Little Rock AR... got a busted wire on the tractor's rear left turn signal. GRRR! It's either shell out a lot 'o $$$ for the assembly, or go do surgery with a soldering iron - gotta get one of those too! Upside... finally got the "Maine" off of my truck from last weekend.

 

IP, if you're handy enough slinging solder, you might want to get a butane soldering iron. The cheap ones go for about $20; I've seen them at Sears and Home Depot. Don't fall for the rechargeable battery ones; they aren't worth the effort.

I bought a Pyropen a long time ago. They aren't cheap, but they have have power. (Insert Tim Taylor grunts here.) On high, they're comparable to a 150W soldering gun; on low, about a 30W pencil.

 

OK, so we met. Were you the guy with the R/C cars? Need a hit here. Nice meeting you. Great tail wind, with 10.5 across Wyoming and now at 9.3 in Nebraska.

 

That was someone else. I was just passing though security with a "hidden" trailer. Thought you might have been in there. Maybe next time.

 

It's mostly the grade... from about 8500' west of Cheyenne down to 3500-ish out near Big Springs NE. Almost all downhill. Taking a break, Jackson TN.