I recently graduated driving school and I am looking to start with PGT Trucking around the 19th of Nov. My question is what kinds of things should I bring with me to orientation. They say it will be 1 week and then out on the road for 2-4 weeks. It will be up in PA so I expect it to be cold and will pack accordingly, but what are the things I will need/ want that they don't tell you to bring.
Question from new driver
Discussion in 'Flatbed Trucking Forum' started by cjr323, Oct 24, 2012.
Page 1 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
LOTS of gloves! other than that I would just take the bare minimum since you will most likely be with a trainer.
SHC and MackDaddyMark Thank this. -
What kind of gloves work best. I have a ton of the shooter style combat gloves left over from the army, but I am not sure if you want thick ones or a pair where you can manipulate things easily and are a bit thinner.
-
A hooded sweatshirt and good boots to go with the gloves. And of course a coat. Everything else will be teeshirts and denim. You might want to make sure your boots are insulated. Normal shoes are good for walking in and out of the truckstops and whatnot, but if you are standing in the snow for any length of time, your feet will freeze to the point to where you cant feel below the ankles.
One more thing: when they give you the green and white bible, BE SURE TO READ IT! -
Do most places require steel toe boots?
-
They all require steel toed shoes. They don't have to be boots. These are sneakers that have steel toes also.
-
That is what I figured. What kind of gloves do you recommend?
-
I have yet to be to a place that require me to have steel toed anything. Including nuclear plants, steel mills, and chemical refineries. Now they do require a hard hat, long sleeves, safety glasses and boots, but never steel toed.
And to the O/P: just bring a few pairs of gloves and jacket. They will most likely supply you with the rest. And of course bring enough clothes to last you a month on the road.... And it's $2 wash and $2 dry for the machines atthe truck stop, so bring that too lolMackDaddyMark Thanks this. -
I have a bunch of old army boots, but they tend to get wet. I was planning on getting some good water resistant insulated boots any way, so I suppose I will just get steel toe to be safe.
-
Gloves have always been an important thing to me. Whereas most guys will use your standard work gloves, which I will as well if I can't find another pair, I actually tend to use something close to a mechanics glove.
I like the closer fit which makes manipulating things in your hands much easier.
I also tend to look for work gloves with knuckle protection, when its cold and wet and your hand slips off your winch bar and runs into the trailer, you'll be happy to have that knuckle protector on it.
But, be careful about the grip material on the gloves, some will become essentially worthless when it gets wet, I've experienced that with the plasticized grip patches (up close they look rough). Those sort are great in dry conditions, but, the moment they're wet they're too slick to get a decent grip.
I would go down to Sears and see what they have, Home Depot or Lowes will have a good selection as well.
This is just personal preference though, plain old work gloves are perfectly suitable.MackDaddyMark Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 5