Watering truck help?

Discussion in 'Experienced Truckers' Advice' started by krpv, Oct 26, 2012.

  1. krpv

    krpv Light Load Member

    64
    6
    Oct 26, 2012
    0
    Hi, I've been otr for almost 4 months and got a watering truck gig starting this monday, because it pays better. All I know about the watering trucks is they shoot water on the ground,
    can anybody give me some info on how to use a watering truck- pumping the water, controls I need to know, and so on? I really want to make this work and learn as quick as possible.
    Thanks for any info/advice.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Passin Thru

    Passin Thru Road Train Member

    1,918
    565
    Mar 8, 2007
    VA
    0
    You will probably be required to load at a pond and have to start the pump and pump your own load on. Then You go to the haul road and stop, put the powertakeoff in gear, its the little handle by the seat usually, make sure your're not moving and have the clutch in, and drive slowly till all the water is gone. Repeat the process 250 times a day. You may be driving a Nineteen-o-nuthin single stack Mack.
     
    Logan76 and Lonesome Thank this.
  4. NavigatorWife

    NavigatorWife Road Train Member

    2,937
    2,080
    Apr 30, 2012
    Cental West, AL
    0
    I don't know nothing about it, other than be careful and watch out for traffic. I wonder if you have to run your hazard lights, or if they have flashing lights of some sort attached to the roof.

    Hopefully they will have someone who will be able to show you what you need to do.
     
  5. amscontr

    amscontr Light Load Member

    113
    96
    Dec 12, 2010
    Illinois
    0
    It depends on what type of "Watering Truck" you are operating. If it's like for Construction most have a PTO/Power Take Off and a pump and a series of control switches for your valves for your spray outlets/heads and a few hose outlets. Loading depends on the water availability, most are top load connected to a supply hose from a hydrant or water company. If you run a truck that has suction like a Septic tank truck, Vacuum truck etc. then you can draw out of a pond, lake, etc.
    If you are supplying water for machines like concrete pavers, asphalt rollers etc. you'll have to engage the PTO/Pump choose the correct switch or control and fill their supply tanks before they get close to empty to keep them going. Also if you are on a paving project water trucks are used to supply water for power washers for cleanup afterwards and used to "cool" down asphalt on hot summer days for asphalt rolling. Spraying roads for dust control is pretty easy just use your rear sprayers and maybe a side one. Usually someone will tell what they need done, so it is a fairly easy gig if it's Construction. Oilfield is a whole different ballgame.
    Good Luck!
     
  6. Logan76

    Logan76 Crusty In Training

    4,528
    17,698
    Jul 12, 2009
    kittanning, PA
    0
    Oilfield water truck work is easy.
     
  7. aktundratugger

    aktundratugger Light Load Member

    126
    32
    Feb 10, 2012
    up on the hill, Ak
    0
    if you're watering a road, try not to turn it in to mud, just keep the dust down. if a pad the blade operator will let you know, or the compactor operator. water truck is a good gig, i like pulling a tanker for watering big road projects. all trucks will be set up different but will do the same basic thing, some will be more user friendly than others, no problem and good luck.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.