I use atleast all 6 of my 3/8 on anything bigger then 30k so dont feel bad. Im exremely paranoid about them.
Life at Melton
Discussion in 'Flatbed Trucking Forum' started by daveman520, Jan 29, 2013.
Page 3 of 11
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I just sat in line for 45 minutes to check in at USS only to find out it was the wrong check in line. Man do I feel stupid
-
-
-
Always ask homie! Right check in place? Am I loading this correctly? Do I need any more securement? Can you help me?!? We all do it, only Jack holes won't assist, or at least tell you what to do if they cannot assist.
camels76 Thanks this. -
Dave don't feel bad, we sat at a nucor for an hr on the hot-mill side ( which is what the load assignment said) waiting for the proper pu#, only to be told our load was on the cold-mill side.
-
worked for Melton for over 2 half years never sat in Laredo always in and out .As far as them telling you to roll when roads are so bad cops are telling you to stay out is BS . Had a good first 2 years with them ! then the last eight months the runs were getting shorter 400 or so mile runs my pay was going down ;( All the drivers i talk to said the same thing so i moved on . If i would of got 800 min to 2000 + mile runs like the first 2 years i would still b there
-
Can somebody please explain how to tarp a shotgun coil. I literally couldn't get the tarp on after 10 hours of trying every which way
-
its hard to explain without showing....best I can do is forget about making it look pretty. do whatever you have to do to keep the tarp from flying off as you go down the road...use all your bungees, all your straps, whatever you have to...and just get the load rollin
what really puzzles me is that no one helped you? -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 11