Volvo vnl cruise control not working

Discussion in 'Volvo Forum' started by goranvolvo, Mar 7, 2013.

  1. goranvolvo

    goranvolvo Bobtail Member

    19
    5
    Mar 2, 2013
    0
    speed sensor new, brake pedal switch working , brake air pressure sensor working one next to clutch pedal on the fire wall , clutch switch working , engine brake working ,speedometer working , cruise will work when the truck is parked,will not work when in motion
    Controls for the cruise, of, on, resume, + and – all working when parked

    don't know what else to check
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Driveone

    Driveone Light Load Member

    53
    10
    Oct 26, 2011
    South Carolina
    0
    In my experience it the sensor on the end of the transmission sensor where the Yoke is where the driveline hooks up a round one sometime hard to pull out dont be surprised if you break a few some call it the speedometer sensor but don't know the official name for it but in my experience that's what it was hope it helps.
     
  4. goranvolvo

    goranvolvo Bobtail Member

    19
    5
    Mar 2, 2013
    0
    it is speed sensor and i did replace it already
     
  5. Driveone

    Driveone Light Load Member

    53
    10
    Oct 26, 2011
    South Carolina
    0
    Then hold up the break pedal with your foot and try it cause volvo has those problems I put a small bungy cord to hold mine up...
     
    deandrea1077 Thanks this.
  6. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    check clutch pedal switch and brake pedal switch. If you see brake light is off when pedal releases it does not mean brake pedal switch is ok, becouse brake loght is controled by pressure switch
     
  7. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    OMG) exuse me for poor spelleng... it is March, the 8.... Female's day here and we are drunk) LOL
     
    Pmracing Thanks this.
  8. goranvolvo

    goranvolvo Bobtail Member

    19
    5
    Mar 2, 2013
    0
    read my original post again
    all testing is done on the sensors and switches
     
  9. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    any VECU fault codes?
     
  10. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    can you rise up idle RPM with C/C switch?
     
    flood Thanks this.
  11. flood

    flood Road Train Member

    4,024
    3,764
    Dec 25, 2010
    0
    never had a code and the controls always work when parked BUT mine will do that from time to time....... what i do is when driving hit the brakes quick then lift the brake pedal then it starts working like it should for days/ weeks/ months.... it's done it 4 times in the last 2 years,

    remember that when the dealer is checking it they are doing it when it's parked, and all the controls work when parked, you need to find a dealer that will do a ride along and have their laptop plugged in when YOU are driving
     
    Jacoooooooo, ydavidenko and Benek Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.