clutch adj.

usually no fork ajustment required. But ajust clutch pressure plate if you have something like easy pedal

 

Depends on what type of cluch you have. If its Solo its self adjusting.

 

what kind of clutch?

 

Becouse it is hydrolically controlled.

Ok, there are two points of ajastement. Nut on pressure plate (yep, remove small bellhousing door first) and pushrod may be ajastable.

 

Go under the truck open the service hole , bump the start key until adjusting bolt faces down , get a socket and ratchet have someone push the clutch pedal and hold it , put the socket on the bolt push it in and turn the bolt 1-2 turns , start the engine ,check the pedal ,if to high turn more

 

Bump the key so engine turn over keep doing that until you se the bolt