Yeah, I always get them at the bar.they are big and meaty. Depending on the day, I'll get garlic or hot. Mmm. Not today for me, but at least I'll get some fried chicken from AC&T later.
Where is everyone #2!!
Discussion in 'Flatbed Trucking Forum' started by Cluck Cluck, Jun 4, 2013.
- Thread Status:
- Not open for further replies.
Page 48 of 962
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Well, I did my local stuff today and got an interesting one lined up for tomorrow... picking up 2 steel beams @ 65' long. They are going a whopping 7 miles straight down the road from one build site to another.
I have never ran with anything over 4' off the rear of my truck, so it will be a new one for me, especially since they will be 15' of rear overhang. Aparently, I do not need any permits for this in IL as it's an "exempt" product (poles, beams and structual steel) and under 80' long. I got my strobe light for the rear, plus my fox fires, and hopefully I can get one of the guys from the site to follow me to the other site just to be safe. -
At home, while getting unloaded in Monroe this morning the plant lost power while 1/2 my load was hangin in the air.Went to load my lumber going to Toldeo (Lowes on Alexis Rd) got there at 11am left at 4pm
Going to have a bite to eat and head to Toledo -
-
-
SHC, you will be fine. Just watch the tail swing and make sure there are not any porta johns on the turns.Haha
-
I'll wave when I go by cluck...I run that way to avoid 75 in MI because its so rough...
-
-
Olympia Wa at the pilot... got all 4 drops off today and then was told to head to Portland to load some aluminum back for LA but turns out it doesn't pick up until Saturday so looks like I'll do a whopping 100 miles tomorrow and then hangout in jubitz all day
-
Sitting with the boss in Millette, SD.
Unload in the morning and head for home.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 48 of 962
- Thread Status:
- Not open for further replies.