Furniture Row Express

you have to pop off the unit from the holder. Unplug the wire in the back and plug it back in. Mine did that a few times.

 

Hey Gopher... This is what you have to do... Under the bunk you will see a white cable, looks like a phone cord, it is plugged in to the electronics board... Unplug it... There is a catch under the cord like a phone cord... Then plug it back in after a minute or so... You will then have power back to the control unit... Had the same problem with 254 back when I had it...

 

That's the same cord that runs to the control unit I was talking about. It would be a lot easier doing it the way John describes though.

 

Thank you. That worked

 

To dang hot to not have A/C while your cooking lol!!!! Well its another Monday. up 0500 doing my cafine and nicotine routine. Wonder what we will do today? could it be Gel Tanker, Pump truck, Ah maybe flatbed. or, End dump. thats the cool thing about this is you just never know what or which way you will go

 

I am sitting in Sacramento doing a restart waiting to deliver in the morning. Then it's up to Washington, and possibly out to the Carolinas!

 

Are you at the infamous 49er Truck Stop?

 

Well my Dynasys didn't want to feel left out so now it is giving me problems. It does not indicate any battery voltage and keeps setting off the no charging alarm. All the while it restarts and keeps on working.

 

Ended up taking the double rail trailer back to El Eldorado AR again. Had a dummy that pulled in instead of backing, woke me up to say he needed to get out. Foreign of course

 

I did at Efron suggested and popped off the control unit because it seemed simple enough and unplugged it then plugged it back and it worked but thanks to all you guys that offered your help and if I run into you anywhere on the road I'll buy the coffee,tea or soda. I'm in 280. Look me up. PS: I wrote down who offered assistance.lol