Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Shift finger rail position

Discussion in 'Volvo Forum' started by Helowrenchturn2, Jul 26, 2013.

Page 2 of 2
  1. Aug 5, 2013 #11
    high_roller_302

    high_roller_302 Bobtail Member

    28
    20
    Feb 9, 2012
    Canada
    0
    Hey guys. I've installed a few of these kits now. All it is is a replacement bushing for the shaft behind where the position sensor mounts. The bushing gets worn out and due to the small amount of extra "slop", the position sensor reports a reading to the ecu that the ecu doesn't like. Common failure. The green dots on the newer actuators indicate that they have the newer style motors.
     
    high_roller_302, Aug 5, 2013
    high_roller_302, Aug 5, 2013
    #11
    2013Maxx, Mlaz Bogdanci and Helowrenchturn2 Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Aug 5, 2013 #12
    Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    how long does it take to replace it??
     
    Helowrenchturn2, Aug 5, 2013
    Helowrenchturn2, Aug 5, 2013
    #12
  4. Aug 6, 2013 #13
    high_roller_302

    high_roller_302 Bobtail Member

    28
    20
    Feb 9, 2012
    Canada
    0
    I've only fitted the kit on volvo units. On a volvo, as long as you're not too large a guy, can be done without dismounting the XY from the transmission. Takes less than an hour.
     
    high_roller_302, Aug 6, 2013
    high_roller_302, Aug 6, 2013
    #13
    Helowrenchturn2 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 2 of 2