Air dryer keeps dying out.

Discussion in 'Trucks [ Eighteen Wheelers ]' started by SpankingGT, Sep 4, 2013.

  1. SpankingGT

    SpankingGT Light Load Member

    253
    55
    Sep 9, 2010
    0
    04 Columbia freightshaker!

    This is the third time this year I have to replace my air dryer. Is there a reason for this? Im also changing the air governor as well ( original not reman ) Is there something else I should look for that is causing this?

    Thank you in Advance!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,815
    6,268
    Feb 4, 2009
    0
    What is the failure? What brand of dryer do you have?
     
  4. richardj87

    richardj87 Bobtail Member

    31
    9
    Aug 24, 2013
    dsm Iowa
    0
    are you getting alot of oil discharge out of the dryer? could be that the Air Compressor is worn out oil will kill the insides of an Air Dryer
     
  5. cetanediesel

    cetanediesel Medium Load Member

    470
    186
    Mar 26, 2013
    Albany, NY
    0
    Air dryer, compressor, governor all at the same time. Stop waising time screwing around and get back to making money.
     
  6. SpankingGT

    SpankingGT Light Load Member

    253
    55
    Sep 9, 2010
    0
    Its Bendix brand. Today I replaced it and replaced the air governor. While I had to do a bypass to get the truck rolling, when installing the air dryer, I did see a lot of dirt with water. No oil though. Even the people at the freightshaker dealership were giving me hard time over replacing the air dryer under warranty.

    The failure is always the same, it will just let all air out from the purge valve.
     
  7. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    may be compressor is old and throws oil in air system, so air dryer goes bad. check it and rebuild if necessery
     
  8. QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,817
    1,783
    Jun 14, 2009
    romulus,mi
    0
    you need to replace unloader valve and o rings/gaskets.full of carbon build up.very common problem with series 60 (how did i know engine?lol!)bendix kits #5008557 unloader/#5008558 gaskets.when apart clean very well.good luck.
     
  9. Heavyd

    Heavyd Road Train Member

    7,815
    6,268
    Feb 4, 2009
    0
    Does the air dryer purge every 20-30 seconds, because it isn't supposed to. Probably wearing out prematurely. Something else is likely wrong. QualityTruck is reading my mind, good advice.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.