CB will not transmit

Discussion in 'CB Radio Forum' started by sarge tom, Sep 27, 2013.

  1. Sep 27, 2013 #1
    sarge tom

    sarge tom Bobtail Member

    2
    0
    Sep 27, 2013
    Ga
    0
    I have a uniden pro 520 xl. There is no tranmission. Receive is good. When I transmit, the TX light goes red, the receive light is red. swr reading is below 2.
    Does anyone have a clue as to what is going on here? Thank's in advance.:biggrin_255:
     
    sarge tom, Sep 27, 2013
    sarge tom, Sep 27, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 27, 2013 #2
    Ridgeline

    Ridgeline Road Train Member

    22,731
    123,550
    Dec 18, 2011
    Michigan
    0
    If the swr meter is moving, you are transmitting.
     
    Ridgeline, Sep 27, 2013
    Ridgeline, Sep 27, 2013
    #2
  4. Sep 28, 2013 #3
    sarge tom

    sarge tom Bobtail Member

    2
    0
    Sep 27, 2013
    Ga
    0
    Thank's Ridgeline. Just to clear up. Are you talking about with the swr meter in line with radio and antenna when setting antenna. The radio does not have a swr just the lights showing signal strength and transmit. The lights for transmit comes on red but nothing goes out. I'm wondering if the tx light would come on if the last stage transistor is bad or would the tx light NOT come on.
     
    sarge tom, Sep 28, 2013
    sarge tom, Sep 28, 2013
    #3
  5. Sep 29, 2013 #4
    Turbo-T

    Turbo-T Road Train Member

    1,953
    708
    May 31, 2009
    0
    How do you know the radio is not transmitting? Can you not be heard on someone elses radio? Can you plug in a dummy load lamp ($6 from redmans CB shop on eBay) and see if ti lights up when you key up?

    I recall the 520 uses a different mic than some of the other radios (condenser mic)....have you recently changed mics?
     
    Turbo-T, Sep 29, 2013
    Turbo-T, Sep 29, 2013
    #4
  7. Oct 9, 2013 #5
    seamus54

    seamus54 Bobtail Member

    7
    0
    Oct 9, 2013
    0
    hi have you checked the swr with that radio or with another one so if you got a reading with the original radio then you have a transmission signal from the radio i would suggest that you have a switching problem inside the radio such as a transistor that switches between transmit and receive you will need a circuit diagram to do this assuming you have the needed tools and electronic expertise to do this kind of work hop this helps.
     
    seamus54, Oct 9, 2013
    seamus54, Oct 9, 2013
    #5
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.