I have an ancient but functional 23 channel Cobra 21 that I'd like to use. I bought a magnetic base antenna with a load coil from Radio Shack. Everybody I talk to tells me the signal has a bad squeal. The antenna is mounted on the roof of a f-250 extended cab truck with a camper on it. Any ideas about whtat's going on?
Cobra 21 Sqeal
Discussion in 'CB Radio Forum' started by 63alaskan, Mar 9, 2008.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
do you use a power mic?
-
The mic would be my first guess, too... esp. if you leave the talkback turned on.
Noise cancelling mics are worth the money, for sure. -
if the power mic is turned to high its probably the cause....
i think if the talk back was on he would know it squeals as well.... unless the talk back speaker isnt working... -
could be a short in the mic being a electronic switching system, a failed part, SWR Mismatch, corrosion on the board itself .
my sugguestion take it to a repair shop that works on radios and doesnt rip you off.
Good Luck ! -
ha i just re read the post.... yeah hes /\ right you probably wanna get the whole thing checked out, i mean old electronics dont work forever... but who knows it could be something unrelated to the condition of the radio, or a mic... it could be the antenna set up or a ground problem or something. first step make sure all is well with the radio....
-
rf gain could possibley be to high try adjusting down little by little
-
I have a Cobra 21 as well. It died on me this last week. I can listen but if I try to talk it just comes over the FM radio and no one hears me. Got a lot of use out of it for a free radio.
Guess I'll just buy a new radio in a week or two.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.