Volvo D12 1996 year

Discussion in 'Volvo Forum' started by vulep, Dec 24, 2013.

  1. vulep

    vulep Bobtail Member

    2
    0
    Dec 24, 2013
    0
    Regards friends.I am new here.I have volvo fh 12 ,with d12 engine,1996 year.It can not start.I have not wiring diagram for that engine.I think that is cam sensor difficult.He has resistance 65 ohms.Is it ok?Please,if somebody has,post wiring diagram for this engine.And,how muchh preassure must have feed pump on cranking?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. tsavory

    tsavory Road Train Member

    1,910
    1,860
    Jun 4, 2013
    Paoli, IN
    0
    Cam Sensor Info
    Type: Inductive
    Resistance 700 – 1100
    Working range 40 – 2500 rpm
    Max. gap between sensor and pole wheel 0.3 - 0.8 mm (0.012 - 0.031 in.)
    T2006891

    not sure what you mean about feed pump on cranking?
     
  4. tsavory

    tsavory Road Train Member

    1,910
    1,860
    Jun 4, 2013
    Paoli, IN
    0
  5. vulep

    vulep Bobtail Member

    2
    0
    Dec 24, 2013
    0
    I think when cranking,how much must be feed fuel preassure in cylinder head.Thank you for file about D12.
     
  6. CondoCruiser

    CondoCruiser The Legend

    19,726
    18,734
    Apr 18, 2010
    Tennessee
    0
    Have you checked for codes? If you have fuel and power to the ECM it should start. Double check the ECM hot wire at the battery. Sometimes the crimp can fracture and fool you. Wiggle it a little bit.
     
  7. tsavory

    tsavory Road Train Member

    1,910
    1,860
    Jun 4, 2013
    Paoli, IN
    0
    http://sdrv.ms/1c41I5I maybe helpful its with the d12d but concepts and readings should be close on other versions
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.