Post your flatbed load pictures here

yup they are going to Arlington

 

you were definitely looking at the wrong second choice, I been there and got the t-shirt

 

I was in and out in 25 min max. Easy breezy

 

There a polishing place in Az where the 8 meets I10 in front of the pilot they polish great. In Wildwood I only recommend the guys straight behind the truck wash. The guy has a red silverado and obsess with bikes. The rest of them just like the easy jobs. Best thing to do is to polish them off the truck on the machine charge $40 a rim but they will shine for a long time espicially if you maintain them.

 

That's when they actually cut them isn't it?

 

You bring them in.... and I take them out... (sorta related to flabed in some way lol)

These things suck for loading because they are hard to pack down because they want to spring up... They don't weigh much either just a mere 19tons (16-19tons a load).... I don't know see them being too bad for flatbeds tho...






The material at our transfer station

 

Do you know of a place here in FL that has the VIS machine?

 

my first over length load had 3" over on the front and little under 10" in the rear. not that great but my first time thought I would share it.

 

yup, best way to do it is to light sand them, wash them with aluminum acid and than polish.

 

I meant something different, there is a couple of shops around home that have a machine that they put the wheel on, and it is like a CNC machine from what I am told, it will take off a thousandth or two and leave it like new.