389 Light wiring on 379

Try getting a vin off a 389 and going to the dealer for a printout

 

Turn truck on test which wires have power low beam power high beam and grounds bud there coulors . Is the light you want to install in a housing and what coulors are the wires are the coulors for left head light different from right head. Tell me that and maybe I can help.

 

i just bought a set of take offs from my dealer was if you have any tips chevyho 6 wires to 8 and did you cut the middle stud off or drill cowl as 379 has 5 studs some help would be appreciated thanks

 

Thanks for the reply I got all lights to work on the bench test but can't figure out where the two extra wires for the led strip on the top of light go.does that strip signal as well and do you like the lights. Without measuring I assume the other studs fit just drill the one I really thank you for the help will be installing on weekend

 

Thanks fellow Canuck chevyho got it figured out put 2 blacks together and led strip to cl now u got 6 wires and again tks makes the job real easy now I'm in ont. hour north of toronto