Anyone replaced a WS window controller?

TRY spraying silcone down window felts on each side, Nothing a set of torx head tools cant fix CK. where the wires go threw FT.of door an flex that is where wires wear into bear copper and short out,if you slam door an it starts working better motor is going bad?

 

If its the same as my 01 it will take less than an hour. I took mine out to fix a knock in the door.

 

Not bad to do at all. Half the time will be spent removing the trim and door panel. If your switch is really old,it might be a good time to replace it also. One of mine had slow and intermittent operation which was cured with a new switch.