Anyone ever hit a fence while backing?

Discussion in 'Experienced Truckers' Advice' started by iceman32, Jan 10, 2015.

  1. iceman32

    iceman32 Medium Load Member

    564
    699
    Sep 26, 2014
    0
    The dock was one of those jacking jacking jacking the the trailer in straight then fix it. The thing is, even with the trailer aligned there was about a foot of space between the tractor and fence to maneuver around when I got it setup at a 45 to a 90.

    The other guy had it easy, they pulled two trucks off that was in the way.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mr Ed

    Mr Ed Road Train Member

    1,380
    1,630
    Apr 6, 2009
    Retired in Taunton Ma
    0
    Well,........ I use to hit the road everyday.
     
  4. RedForeman

    RedForeman Momentum Conservationist

    4,875
    22,141
    Jan 30, 2011
    0
    Get your trailer jacked tight enough, it will roll backward while the tractor is going forward. My example posted earlier.
     
  5. ironpony

    ironpony Road Train Member

    17,502
    12,015
    Sep 23, 2007
    Ask my GPS...
    0
    Seriously guys, any time you're in a really tight situation with the possibility of hitting something on the blind side, you're much better off setting up the trailer to back in. THEN, get out and look, and while you're at it slide your tandems to the rear.

    You don't have all that overhang sitting out there to get you in trouble. The back end of your trailer goes where the tandems are, and have the trailer as close as possible to being parallel to the hole as the trailer starts to enter the hole.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.