Rig setup opinions

Discussion in 'Heavy Haul Trucking Forum' started by Stroked F550, Jan 18, 2015.

  1. Rontonio

    Rontonio Road Train Member

    6,303
    45,929
    Aug 9, 2009
    0
    TX for sure but must be an expand - 10' with minimum axle spacing of 5'
    NM is a bit less clear - they state 46K but am not positive that they won't permit for more
     
    truckdad Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Rontonio

    Rontonio Road Train Member

    6,303
    45,929
    Aug 9, 2009
    0
    If you do get one make sure it is not a flip 3rd axle as you will have to fight with the permit folks every time to be issued a permit as technically if the flip axle uses shims they are not allowed - see the Caltrans website to find the document that talks about flip axles . A fixed 3 axle that is 48' and has enough neck to use with a 4 axle tractor is going to be a very odd trailer. I need all 13' of neck on my trailer to get any weight on my steer axle with the lift axle down and the I can only get maybe 16k.
     
    Stroked F550 Thanks this.
  4. Stroked F550

    Stroked F550 Medium Load Member

    325
    42
    Jan 23, 2008
    somewhere
    0
    Thanks Rontonio I will stick with a fixed 3 axle if I do end up going that route.

    So if I will be having a hard time getting weight on the steer would it be better to run a tridem lowboy with a tri-axle tractor?


    From my research it looks like the 48ft trailers have 10ft or 11 foot necks
     
  5. Rontonio

    Rontonio Road Train Member

    6,303
    45,929
    Aug 9, 2009
    0
    You will not get the weight you are looking for in CA. As a 6 axle 1-2-3
    Best you can do is 20+46+60 for 126 and you are going to be 45-50 empty. If you go to a 20k axle state you will not be allowed 46 only 40

    Don't know where you plan to run - just in CA or 48 states
     
  6. Stroked F550

    Stroked F550 Medium Load Member

    325
    42
    Jan 23, 2008
    somewhere
    0
    I will be only running in CA
     
  7. Rontonio

    Rontonio Road Train Member

    6,303
    45,929
    Aug 9, 2009
    0
    Get a 16 tire cozad or Murray and you will get your weight easily and run a 3 axle tractor - then you can always add a jeep. See truck dad's 7 axle pictures
     
    Stroked F550 Thanks this.
  8. Stroked F550

    Stroked F550 Medium Load Member

    325
    42
    Jan 23, 2008
    somewhere
    0
    just so I am more versatile would you recommend getting a tractor with 4 axles and I can use the pusher when the load determines it necessary?
     
  9. Rontonio

    Rontonio Road Train Member

    6,303
    45,929
    Aug 9, 2009
    0
    Not on CA I would not.
     
  10. truckdad

    truckdad Road Train Member

    2,033
    16,743
    Dec 14, 2014
    Penn Valley, CA
    0
    637D AZ.jpg
    If you go the 16 tire route, be advised that the murray "professional" as seen with the D-8T is a 2 rail, wide neck trailer and does NOT accept a jeep. With a big steer axle & long neck it is THE trailer to have in CA. You can load almost anything over the back, put equip. up on the neck, & straddle machines over the rear tires. The "loadmaster" is the 7ax set-up and is a 4 rail trailer 60 ton cap. Very verstile. Get a stinger dolly & you can move 631s, 633s, 637s, water wagons using the full length deck OR the jeep. 33s & water wagons with the main deck, jeep for 31s & 37s. This helps when you think about a second truck, just buy a second neck & you have 2 combos. You can also use the jeep as a very short trailer for those mountain dirt roads. It will take a D-6H easy. 988B.jpg View attachment 77345

    as mentioned in an earlier thread, the newer machines are getting heavier, not sure if the 37Gs will scale on an 8 tire dolly. Cozad builds a good trailer too.
     
    kptnt2016 and Raped ape Thank this.
  11. Stroked F550

    Stroked F550 Medium Load Member

    325
    42
    Jan 23, 2008
    somewhere
    0
    thanks Rontonio and truckdad for your input, sharing your knowledge has been invaluable

    The professional and loadmaster seem like very versatile trailers
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.