Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Linear Troubleshoot

Discussion in 'CB Radio Forum' started by itsjosh33, Feb 2, 2015.

  1. Feb 2, 2015 #1
    itsjosh33

    itsjosh33 Bobtail Member

    5
    0
    Jan 28, 2015
    0
    I have a Midnight Special 250 with a tuned Uniden Pc68XL. When I have the watt meter connected to check power/SWR I get nothing when the amps on. It dead keys at 60 watts and when I talk in the mic It doesn't move a muscle. Any ideas?
     
    itsjosh33, Feb 2, 2015
    itsjosh33, Feb 2, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 2, 2015 #2
    ThatFlatbedGuy2013

    ThatFlatbedGuy2013 Medium Load Member

    591
    119
    Feb 4, 2013
    Somewhere in the US of A
    0
    Bad lead maybe? Do you have it hooked up right? The ######## in me wants to say its because it dont have any muscles ;).
     
    ThatFlatbedGuy2013, Feb 2, 2015
    ThatFlatbedGuy2013, Feb 2, 2015
    #2
  4. Feb 2, 2015 #3
    jessejamesdallas

    jessejamesdallas Road Train Member

    1,416
    855
    Oct 3, 2008
    Republic of Texas
    0
    Mic gain on the radio turned up? Check with a different Mic? Make sure you have the jumper coax and antenna coax hooked to the right connectors on the back of the amp.
     
    jessejamesdallas, Feb 2, 2015
    jessejamesdallas, Feb 2, 2015
    #3
  5. Feb 4, 2015 #4
    itsjosh33

    itsjosh33 Bobtail Member

    5
    0
    Jan 28, 2015
    0
    Everything is hooked up right. I can't figure it out. Is there anyway to test to amp to make sure everything's working?
     
    itsjosh33, Feb 4, 2015
    itsjosh33, Feb 4, 2015
    #4
  7. Feb 4, 2015 #5
    jessejamesdallas

    jessejamesdallas Road Train Member

    1,416
    855
    Oct 3, 2008
    Republic of Texas
    0
    Yeah...with a watt meter. Meter needs to read up to at least 500watts...Test with the amp out of line (just radio, meter, and antenna) and see what the meter says, then check again with the Amp inline but turned off... If you get the same reading you know the meter's working and the signal is going threw the Amp just fine...

    Now turn ON the Amp and see what the meter says...If no reading at all still, then somethings gone haywire inside your box.
     
    jessejamesdallas, Feb 4, 2015
    jessejamesdallas, Feb 4, 2015
    #5
  8. Mar 5, 2015 #6
    Southwind

    Southwind Bobtail Member

    15
    3
    Feb 26, 2015
    Monroe, Georgia USA
    0
    Make sure meter is hooked beyond Amp to Antenna coax. The Amp should dead key more than 60 watts. JMHO
     
    Southwind, Mar 5, 2015
    Southwind, Mar 5, 2015
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.