engine code help

Discussion in 'Volvo Forum' started by peifamily, Apr 10, 2015.

  1. peifamily

    peifamily Bobtail Member

    19
    0
    Nov 23, 2014
    0
    Hi,

    This is a used truck I bought last fall from a retiring driver and doing some repairs to.

    2006 Volvo vn 670 D12 / 13 speed.

    Had it parked all winter and just started up now but pulling codes (some may have been due to the batteries being unhooked when doing the alternator and a few other minor things. (Had low voltage light, had the alternator inspected and the shop said it was not worth repairing.. New one arrived today)

    ECM mid128/pid91/fm19 Engine percent accelerator pedal position?

    Brake ECU saej1939 mid136 sid231 fm19 (Abs? My abs light is on after getting a shop replace all brakes and drums last fall along with rear wheel bearings). (The shop was a very expensive mistake and work was very $$$$ and very low quality). Going to get another shop recheck their work soon as I get it mobile again)

    ECU PSID230

    Climate J1708 - J 1587

    The previous owner replaced the EGR valves two years ago but though they may be going again.

    Thanks!
    Jason
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Snailexpress

    Snailexpress Road Train Member

    2,675
    6,069
    Apr 28, 2014
    Rocky
    0
  4. To many miles

    To many miles Bobtail Member

    7
    4
    Feb 24, 2015
    Fenelon Falls Ontario
    0
    Not really up on my code reading but I think what it's saying " trash the vulva and buy a real truck"
     
  5. peifamily

    peifamily Bobtail Member

    19
    0
    Nov 23, 2014
    0

    Sure.. who do I send the bill for the new truck to? ;)
     
  6. peifamily

    peifamily Bobtail Member

    19
    0
    Nov 23, 2014
    0
  7. benrab

    benrab Medium Load Member

    326
    238
    Apr 5, 2015
    Quebec ,Canada
    0
    About your engine code have a close look at the engine ecu power supply in the battery box (small wire positive and negative)
    Psid 230 is often related with the ground power supply to EECU but the description of the code will not lead you in this way.
    If you ground ECU is not good you can retreive that code,if you ECU ground is good but the main ground is not good you will have the same code because the others component try to use the ECU ground and generate the code. (I spent a lot of time for that one on Volvo engine)
    Ben
     
  8. peifamily

    peifamily Bobtail Member

    19
    0
    Nov 23, 2014
    0

    thanks! That sheds a bit of light onto it.. I had a broken ecm wire last fall, rewired that up and I think I better add another ground to the cab. I think it may be loosing a bit.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.