That thing is like super-load central. I'm sure some of our American friends would be amazed at the quantity of super-loads going to Ft. Mac every day... and it has been going on for years, with many more to come.
We hope.
Big Loads - Post Photos
Discussion in 'Heavy Haul Trucking Forum' started by ColoradoGreen, Dec 7, 2012.
- Thread Status:
- Not open for further replies.
Page 109 of 141
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I wanna pull my hair out every single day!!! I run back and forth between ft mac and lamont everyday. I cannot wait till the twinning of 63 is finished.
-
You need to find a new place to sleep. lol
tsavory and dustinbrock Thank this. -
Well, I finished up those bridge beams in the 16th, delivered the last knee in terre haute, then stacked the dollies and headed home for 9 days. Then picked up a 744K 20 miles from home and took that to kansas, where a new wind farm is slated.
And yesterday loaded up south ok OKC and currently on my way up to the corner of America's butthole AKA the Bakken.
10 loads posted total in that area, so looks like I'll bounce the 600 miles home -
Well the loads just keep getting bigger. This is the largest load for me so far as weight goes. Grossing 155,000 pounds. Empty weight was 65k so the excavator that was supposed to weigh 86k or less actually weighed 90k.
skootertrashr6, peterbilt_2005, tsavory and 3 others Thank this. -
Nice load
I got this almost loaded after 9.5 hrs in the sun. Have to go back in morning and tie it down and put the trailer togetherAttached Files:
skootertrashr6, Pipe 40, peterbilt_2005 and 2 others Thank this. -
-
Ron, what took so long?
-
We'd move that on six axles here... -
normally I would say an idiot driver, but not this time.
The crane has hydraulic leveling (oscilating) system on the rear axle and it is broken. One cylinder was all the qay up and one was all the way down.
\The crane had a significant lean to starboard or the curbside and I would not load it until they could get tosit level.
The mechanic diagnosed it as a bad wiring harness - maybe - after about 3 hours of working on it. Finally they decided to blow off the hydraulic fluid from both cylinders and let the cranes new owners fix it when it gets to houston.
New trailer Big loads very frustrating right now -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 109 of 141
- Thread Status:
- Not open for further replies.