I've read good reviews on the 955 but be sure to wire that straight to the battery as that will give you 70+ watts of power .
Stryker 955hp
Discussion in 'CB Radio Forum' started by wade9233, Jun 3, 2015.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
If you don't care to mail your radio to a tech, I know one of the best. PM me for contact info.
(I just realized I don't know how to PM somebody on this new forum!!!!!!!) -
So long as it's not "hacked and jacked" it's 10A on AM, 15A on sideband. Mine does perfectly fine on my 15A factory wiring.stacks Thanks this.
-
Same here asked Walcott Radio when I bought mine about direct to the battery and he said it doesn't need to be.stacks Thanks this.
-
I do have it wired straight and I'm peaking according to the meter around 100 watts
-
100 watts indicated on a 955? Leaning towards hacked and jacked. Get it on a scope and a spectrum analyzer to be sure.
wade9233 Thanks this. -
It was showing 40 on deadkey.
-
Is hacked and jacked the same as peaked and tuned?
-
These are 60-70 watt radios. For it to be "keying 40, peaking 100" my guess is someone butchered it (i.e. "hacked and jacked") and if so, you're not actually transmitting 100 on-frequency anyway. I would get it to a good tech (who has and knows how to use the requisite test equipment) to be checked out thoroughly.
mike5511 knows a good one, and I do as well. Google Rodehog Communications, or Fine Tune CB Shop. -
From what I've read 60/70 watts pep is right for one 955
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3