Heavy Haul Miscellaneous Thoughts, Ideas and Questions
Discussion in 'Heavy Haul Trucking Forum' started by Oscar the KW, Feb 8, 2015.
Page 27 of 56
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
We are investigating equipment to move from a 6 axle rig to a seven axle rig. We would have a four axle tractor. I believe I would like a 53' trailer with a 29.5' well. I would go with a fixed tridem if it would allow me the possibility of a removable 4th axle on the trailer either a flip or a stinger. If not, I would just go with the 48' trailer with a tandem and a flip. So....down to brass tacks. I want to run primarily in MN, IA, WI, IL, IN, MI, OH, PA, WV, and MD. Could we operate in these states with a closed 4 axles or would a stinger be required? Do any of these states cause issues with overall length and requiring escorts? Our extended area would include anything East of I-35. Are there other states in this area that would cause issues for this type of setup?
-
Watch pin law in Mn. But you can buy an mty move permit for that. I found out the hard way.
Those states yes you can run a tight four and be ok. Now Mo. Ok. Nc. and Wy. Well that's west of I35 lol They will most likely only give you 72,000JDP Thanks this. -
Last edited: Jun 9, 2015
-
Cpape, we run 45 and 55ton trailers that have a lift third axle, with mounting for a 4th flip or stinger, that may be another option for you guys
-
Here's an example of one of our setups
Attached Files:
-
-
I like this thread and I don't think we use it enough so I thought I would revive it. Let's talk binders, I have 4 Durabilt binders I carry rated at 15,000, I like the binders fine but I hate hate hate the hooks. The rest of my binders are Columbus McKinnen's rated at 9200, I like those real well but I need higher weight ratings for use with my 1/2 inch chains. What are you guys using and what are the rated for?
MJ1657 Thanks this. -
I don't know the brand (never paid attention) but all mine are rated at 16000. half have the ball bearing on the lock that you have to keep lubed almost all the time for it to work effortlessly. the other half have the spring on the lock that works well with no lube. I attached slip hooks on all the binders on one end along with the regular hook to have the option when needed. also removed the cotter keys and put slip pins on all the hooks of the chains to be able to remove the hook if need be for those tight spots.
-
Just a quick note...never hauped HH, always been interested in it. Just gettif into flatbedding (actually stepdeck) but this thread was like going to school. Thabks everyone!
-
This is a good' threading the needle' video. It happens. As a driver, you laugh about it and wave.peterbilt_2005 and truckdad Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 27 of 56