07 int 9400i

Discussion in 'International Forum' started by TruckerPete1990, Jul 1, 2015.

  1. Jul 1, 2015 #1
    TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,382
    Jul 16, 2012
    Bentonville Arkansas
    0
    Where is the ABS plugs? If i pump my breaks all the way down ill get like 15 faults lol.. I know its related to the ABS system as the first starting numbers are 136 on my dash. Didn't have this problem into cummins crossing touched my truck now i always have 2 faults showing with abs but th abs light stays off unless i hit a blink switch for it. I think maybe the plug is dirty...
     
    TruckerPete1990, Jul 1, 2015
    TruckerPete1990, Jul 1, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jul 1, 2015 #2
    Heavyd

    Heavyd Road Train Member

    7,826
    6,276
    Feb 4, 2009
    0
    Your ABS module is mounted to the inside of the fire wall above the clutch pedal, I think, LOL! The main firewall connector for the ABS should be the larger round connector at the lower left side of the firewall. The wires there are colour coded and many of them are twisted together. This round connector is a twist-lock type. Disconnect it and check for any corrosion as this connector is not quite water proof. Pumping your brakes down will not cause a fault. Unless the ABS light comes on, you are just seeing old inactive codes.
     
    Heavyd, Jul 1, 2015
    Heavyd, Jul 1, 2015
    #2
  4. Jul 1, 2015 #3
    TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,382
    Jul 16, 2012
    Bentonville Arkansas
    0
    I seen some like this on the outside near my windshield washer fluid i wonder if its them?
     
    TruckerPete1990, Jul 1, 2015
    TruckerPete1990, Jul 1, 2015
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.