Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

eaton 13 speed

Discussion in 'Trucks [ Eighteen Wheelers ]' started by k whopper, Nov 7, 2015.

  1. Nov 7, 2015 #1
    k whopper

    k whopper Light Load Member

    100
    13
    Sep 9, 2011
    milledgeville ga
    0
    hi I had a 13 speed installed in my truck it shifts fine but when you push the range button down to the low side there is a small delay before it goes in to the low side there is no grinding just a 5 second delay as if it waiting on air
     
    k whopper, Nov 7, 2015
    k whopper, Nov 7, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Nov 7, 2015 #2
    mountaingote

    mountaingote Road Train Member

    2,026
    7,916
    Sep 22, 2012
    0
    5 seconds? I would say valve problem or something in the air lines
     
    mountaingote, Nov 7, 2015
    mountaingote, Nov 7, 2015
    #2
    k whopper and KB3MMX Thank this.
  4. Nov 7, 2015 #3
    beemergary

    beemergary Light Load Member

    229
    112
    Apr 11, 2014
    0
    Mine can be slow. There's a 5/32" line conversion that makes sense to speed up range and splitter time. I replaced my lines with the 1/8" factory. Like to be able to go to parts store for common fittings and line. Maybe someone tightened down those compression fitting too much and blocked some of the air.
     
    beemergary, Nov 7, 2015
    beemergary, Nov 7, 2015
    #3
    k whopper Thanks this.
  5. Nov 7, 2015 #4
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,730
    Jan 30, 2010
    keep stroking.
    0
    does it do it when cold or all the time.
     
    Superhauler, Nov 7, 2015
    Superhauler, Nov 7, 2015
    #4
    k whopper Thanks this.
  7. Nov 7, 2015 #5
    Cory wood

    Cory wood Medium Load Member

    335
    162
    Nov 7, 2015
    0
    Check your filter and air Inlet on back of Trans, pull the cap off and there's a filter In there that needs to be cleaned. I usually fill with a little atf and put cap back on and cycle a few times. This filter housing is also a regulator that cuts air down to 60psi to operate the tranny, that's probably the whole issue.
     
    Cory wood, Nov 7, 2015
    Cory wood, Nov 7, 2015
    #5
    k whopper Thanks this.
  8. Nov 8, 2015 #6
    k whopper

    k whopper Light Load Member

    100
    13
    Sep 9, 2011
    milledgeville ga
    0
    all the time but I have not really ran it
     
    k whopper, Nov 8, 2015
    k whopper, Nov 8, 2015
    #6
  9. Nov 8, 2015 #7
    k whopper

    k whopper Light Load Member

    100
    13
    Sep 9, 2011
    milledgeville ga
    0
    will try this today it seems like an air issue the guy I got the trans from had it rebuilt and ran it for 3 months and he found a deal on an 18 speed so that's how I got the 13 its been sitting in the corner of the shop around 2 months
     
    k whopper, Nov 8, 2015
    k whopper, Nov 8, 2015
    #7
  10. Nov 8, 2015 #8
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,730
    Jan 30, 2010
    keep stroking.
    0
    well like the other post mentioned or there could be some grease leaking in past the o-ring in the splitter letting it drag a little more than usual.
     
    Superhauler, Nov 8, 2015
    Superhauler, Nov 8, 2015
    #8
    k whopper Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.