Hi everyone - I wasn't sure where to post this thread. Hoping this is an OK spot.
Can anyone help me in figuring out what rear fenders these are? I know they have been customized (e.g. cut off in the back, extra "W" addition in the middle, etc.). But I've been looking at all the popular brands like WTI and Talledega double hump fenders and nothing seems to match.
The three things I'm noticing:
1) Look at the 12:00 position above one of the tires. Notice the 'rounding' of the fender as it moves up from the tire to the top of the fender. Yet most fenders I'm finding don't have this curved edge to it.
2) Also notice how the bottom line of the fender is about even / maybe a little higher than the middle point of the wheels. Yet all of the fenders I'm seeing drop below the middle point by several inches.
3) And finally, notice how the fenders from this particular angle only cover the treads of the tires. But most fenders I'm seeing cover the tread + a few extra inches of the tire.
Again I know these are customized, but the person who installed them had to start somewhere. I was almost thinking they were single hump fenders blended together to look like one piece. But the single hump fenders I am finding have the same problems as what I noted above.
Any advice would be greatly appreciated everyone. Thank you! -Joe
What types of fenders do these look like?
Discussion in 'Questions From New Drivers' started by JoeF2002, Dec 31, 2015.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
they look like Talladegas with a custom western logo incert
-
Contact Western Star, see who they had make them. I'm assuming you see the Western Star logo?
-
Yes I have contacted Western Star and they aren't sure what fenders these are. According to them the logo insert isn't something they 'sell'. I did think they were the Talledegas but when I look at the options for those double hump fenders, nothing seems to match this style.
-
Ok, wasn't trying to be flip. I was thinking it was on one of their MATS show trucks, didn't think about it being after market until I hit post reply.Oops!
-
I was thinking this is what the fenders were on.
-
Did anyone else notice that the hubs are sporting the Transformer's logo?
Mudguppy Thanks this. -
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2