2006 odometer?

Discussion in 'Peterbilt Forum' started by Steve anderson, Feb 29, 2016.

  1. Feb 29, 2016 #1
    Steve anderson

    Steve anderson Bobtail Member

    2
    0
    Feb 29, 2016
    0
    Hello? Looking at a 2006 peterbilt 335 with the Cummins 8.3 engine. It has very low miles. Is there anyway to plug it in a see if the true miles match the odometer?
     
    Steve anderson, Feb 29, 2016
    Steve anderson, Feb 29, 2016
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 29, 2016 #2
    brian991219

    brian991219 Road Train Member

    3,027
    6,223
    Aug 10, 2013
    Lords Valley, PA
    0
    Yes, that motor will respond to a diagnostic scanner, or if you have access to Cummins Power Spec and the connector cable you can do it on your laptop. I would look not only at the odometer to see if it matches the ecm reading, but also look at the total hours and total fuel, if you have very high hours that can be just as bad, if not worse than high miles. Also could be a sign of odometer tampering, if say the hours are very high and so if the fuel gallons consumed, you may have had some tampering.
     
    brian991219, Feb 29, 2016
    brian991219, Feb 29, 2016
    #2
  4. Feb 29, 2016 #3
    Steve anderson

    Steve anderson Bobtail Member

    2
    0
    Feb 29, 2016
    0
    Perfect, thank you for your help!
     
    Steve anderson, Feb 29, 2016
    Steve anderson, Feb 29, 2016
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.