Cascadia Antenna Solutions

Discussion in 'CB Radio Forum' started by mike5511, Apr 30, 2014.

  1. racemaxx24

    racemaxx24 Heavy Load Member

    718
    922
    Jul 4, 2014
    East TN
    0
    Oh yeah, if anybody happens to see the other 5ft 10in of that antenna laying on 287 in NJ grab it for me would you. :D
     
    Neverready and tucker Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Neverready

    Neverready Medium Load Member

    406
    330
    Jul 24, 2014
    Pocomoke City, Md.
    0
    My second francis 5.5 broke this week. It lasted about 5 months. It seems the extra wind force and bending by tilting it slightly forward is harder on them. Support as some have done would help. Added 2 !0" sections to the bottom of a Wilson 2000 today had to trim about 8" off the whip to bring swr to 1.5. Getting ready to switch trucks next month so will start the process again then.
     
  4. 25(2)+2

    25(2)+2 Trucker Forum STAFF Staff Member

    18,756
    45,804
    Sep 18, 2006
    the road less travelled
    0
    I understand you can pull some of the winding out of the end of a Francis and trim that. I have never seen a tunable tip of that brand that I recall.

    I still have the antenna, and the broken off stud is still in a base somewhere around here, but the Firestick 7 foot broke at the top of the threads.

    Ice is hard on things, especially freezing fog.
     
  5. racemaxx24

    racemaxx24 Heavy Load Member

    718
    922
    Jul 4, 2014
    East TN
    0
    Yeah I don't really have any complaints about the SkipShooter lasting as long as it did. On top of the ice I run out west a lot with their 75mph+ limits which layed it back even worse.

    I was thinking about giving the 7ft Firestik a try. Despite it also breaking was it pretty rigid at speed or a lot of flex?
     
  6. darthanubis

    darthanubis Heavy Load Member

    825
    616
    Jun 26, 2015
    0
    A lot of flex. It ain't angled to look cool out for swrs. It's angled so at does it doesn't slap the cab and mirror. Mine bends straight up at speed
     
  7. racemaxx24

    racemaxx24 Heavy Load Member

    718
    922
    Jul 4, 2014
    East TN
    0
    Yes I had a lot of angle in my SkipShooter to get it stood straight up at speed. Was hoping the Firestik is a bit more rigid.
     
  8. Sham3R

    Sham3R Light Load Member

    60
    29
    Mar 21, 2016
    AZ
    0
    So I'm in a 15 Cascadia Evo my CB set up gets me 1.3-1.4 SWR approximately ( knowing these truck stop meters are gonna be slightly off )

    I've just got a Cobra 29 LX, 12ft Mini 8 coax from a Firestik Firefly 4footer ( hand tuned )to an Astatic PDC2 SWR & Power Meter. A home made 3ft jumper ( yes I soldered both caps on ) also Mini 8.

    The antenna is mounted on a 2 bolt BirdPerch mirror mount with a 3 inch spring mounted on the antenna ( original SWRs thrown were showing too short couldn't tune it up enough via antenna ) and its roughly at a 15 degree angle..

    I got no clue on its range yet since the majority of drivers these days don't even use the #### radio.
     
    darthanubis Thanks this.
  9. wolverine11

    wolverine11 Road Train Member

    1,629
    1,234
    Apr 1, 2015
    0
    Ive been using the 5ft Firestick, and I too drove in that ice and snow storm in northern Ohio Saturday morning, and the attenna was covered in ice but really never appeared to be in danger of breaking off. In response to the question of an adjustable tip Francis they did make one about 8 years ago because I had a 4ft one that I used on a Volvo for a while, they were alot more thicker in diameter than the regular Francis hot rod, I dont have mine anymore and I dont see them anymore so I dont know why they stopped selling them. If my Firestick ever does break Im going back to my 10k with the 27 inch shaft.
     
    darthanubis Thanks this.
  10. craig_sez

    craig_sez Road Train Member

    5,570
    2,714
    Sep 5, 2013
    novascotia,Canada
    0
    Lol everyone is stuck on the ideal of low swr..more to it than that..
    Dont remember what it was but i used something like wd40 on a rag and rubbed in on so snow/ice would have a harder time sticking..
    For ant stability why not use a foot or so of pvc pipe matched as close as possible to ant thickness to add base strength..A shot of spray in foam to ack as filler to fill the gap between ant and pipe..
     
  11. 25(2)+2

    25(2)+2 Trucker Forum STAFF Staff Member

    18,756
    45,804
    Sep 18, 2006
    the road less travelled
    0
    ] I don't think making part of an assembly less flexible while leaving the rest to flex is a good idea. The top of the mirror support would be better for the antenna, IMO.

    There is another seven footer by 10k called the Night Stick, but I have been unable to find it in stock.

    Shipping any of these really long antennas is pricey, best to pick one up from a dealer if you can find one.

    Copper Electronics seems to be a good source for ordering, if you go that route, but I haven't, yet.
     
    darthanubis Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.