I had two different ta/petro do an alignment on two different trucks, 1in little rock, ar the other one in whitestown, In. Gad to get both of them redone again from the dealer cause ta/petro sucks at alignments.
Ta/petro alignments?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by TruckNorris, Apr 28, 2016.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
-
I used a well recommended shop here in Saskatoon, A-Line. They charge $150 per axle, I have eight of them.
They did tweek the front axle, the rest they said were within spec.
I don't want it within spec, I want it STRAIGHT.
Two of the trailer axles were off, one 1/8" and the other 1/4". Wound up doing it myself. And yes with a tape measure and string. Old fashioned works great. -
Any recommendations around the Lansing, Mi area ?
-
Thanks for the info, everyone.
This weekend I saw the steers got really bad the last few days, so I planned to swap them out and get an alignment, went to take the rim off and someone crawled under the truck and duct tape a #### ton of weights to the rim. They weren't there two weeks ago when I installed centromatics, so that was my issue. Cleaned them off and now no shimmy, and going straight down the road. Still getting an alignment to double check, but hopefully that's all it was.
Thanks again guys -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2