I have a fld classic 2000 with a sanden compressor and i have freon coming out relief valve on back of compressor. Old one lock up so I replace dryer front expansion valve and compressor. Before it lock up it was working fine now I'm clueless
Ac problem
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Xavier jackson, May 28, 2016.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Its blowing out the back because thr pressure is too high. Did you replace the condensor at the same time? Did you have the system vacced and recharged? Orrrr Did you simply replace the compressor and try to charge it yourself....
I'm guilty of the last.... shame on me. -
I had it vacum down ,and i did not replace condenser
-
Does the fan cycle on and off?
-
No only a/c click on and off
-
Your fan should cycle on and off with head pressure. Could be bad high pressure switch,fan switch.
-
I changed the high pressure switch on dryer and nothing. Got to find other switch. Shop say there must be a blockage some where because high side didn't look right on gauges
-
Make sure you hooked the lines to the right ports on the compressor. Not trying to be funny,I've seen it happen
-
The blockage is in the condensor. When your compressor failed it plugged the condensor. Change it. Flush the lines. Vac and charge.lilillill Thanks this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2