Ultimate antenna mounting stud coming soon

exactly its a real truck.....not a shake and bake

 

BORED..Got to thinkin about those 2 lil teeth..Shouldnt make a diff cause it still connected via the screw on part..


Well i was out today,slapped on my duel coiled 10k with a solid 18 in shaft short top mast and got slightly better #'s that my single coil on a hollow 22 in shaft still useing the 40 in tallcascadia ant mount..
To far into the wobbley pops to drive to an open area to dble chk my mfj #'s..Cars 20 or so feet away,power lines over top of me and ma hemi behind me so im sure they will change...

Dishes all cleaned,bbq scrubbed down,fully belly of steak,corn,spuds with a splatter of mushrooms,onions,peppers ect ect now back to the rum n cokes..

 

your living the life man !!! go for it

 

yeah I got the 15 degree tilt on the 40 inch but I can still click a 13'9 bridge.. Chicago that's where I run out of. I'm gonna buy the stainless steel bracket and slide it down 4" that should put me where I need to be at. the whole unit should be more stable after I do that too.I'm staying with the 40" pole mount...I'll compensate and adjust however I have to ....... got a ground strap onto the driver's door. but I'm gonna hunt down more strap double it up on drivers door.then throw one good strap on the passenger door.....these are such wonderful trucks we drive..............not.

 

actually those teeth should bite the connecter threading coming out of the back of the radio...... you have turn it and you'll know when it bites. it's precise

 

Wasnt referring to the back of the radio,i ment on the ant stud side..Look at the pic and see that flat surface..No place for the teeth of the pl259 to set into...So i was gonna file them down but got to thinkin..Why the screw on part that attaches to ant stud will offer a good solid connection..

 

hope thats not the stud your using.....lol

 

Noooooo im useing what looks like the wilson hd stud but from hard drive himself...I compared the two by looks but only saw a very suttle difference in the plastic washer..Seems the same other than that..