2010 isx cm 387 crankcase pressure sensor.

Discussion in 'Peterbilt Forum' started by anunodisooo1, May 24, 2015.

  1. May 24, 2015 #1
    anunodisooo1

    anunodisooo1 Bobtail Member

    9
    0
    Feb 23, 2012
    dallas,tx
    0
    I have a crankcase pressure light on and I've changed the crankcase filter and would like to know if anyone knows where the sensor is located on the engine so I can check it and or replace it.
     
    anunodisooo1, May 24, 2015
    anunodisooo1, May 24, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 25, 2015 #2
    pearcetrucking

    pearcetrucking Light Load Member

    191
    218
    Aug 14, 2012
    Gainesville, FL 48states
    0
    The sensor attaches to the case that the filter is in. Looking at the case, the sensor is on he left side, just above the oil filler nozzle.
     
    pearcetrucking, May 25, 2015
    pearcetrucking, May 25, 2015
    #2
    TallJoe and anunodisooo1 Thank this.
  4. May 25, 2015 #3
    bjytech

    bjytech Light Load Member

    246
    223
    Nov 9, 2013
    Ohio
    0
    Check the wires going to the crankcase pressure sensor before replacing the sensor. its very common for the wires to wear through right by the connector going into the sensor.
     
    bjytech, May 25, 2015
    bjytech, May 25, 2015
    #3
    TallJoe and anunodisooo1 Thank this.
  6. Aug 23, 2016 #5
    Showtyme1983

    Showtyme1983 Bobtail Member

    1
    0
    Aug 23, 2016
    0
    Were is the crank pressure sensor located on a 2010 Cummins isx engine
     
    Showtyme1983, Aug 23, 2016
    Showtyme1983, Aug 23, 2016
    #5
  8. Aug 23, 2016 #5
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,819
    1,784
    Jun 14, 2009
    romulus,mi
    0
    correct info given in above posts.......
     
    QUALITYTRUCK, Aug 23, 2016
    QUALITYTRUCK, Aug 23, 2016
    #5
  9. Jan 20, 2019 #7
    Kemosabie72

    Kemosabie72 Bobtail Member

    1
    0
    Jan 20, 2019
    0
    My 2010 is doing the same thing, I changed the filter. Unplugged the sensor.. I still the code.. any solutions for this senerio. I was thinking it was my plug till I unplugged it and the code remains on the dash readout.
     
    Kemosabie72, Jan 20, 2019
    Kemosabie72, Jan 20, 2019
    #7
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.