Abilene Motor Express....A New Place To Call Home

And thanks for shifting gears too.

 

@RebelChick have you gotten your load to St. Pete yet? Still waiting here for my marching orders.

 

Well, I bought a 24" tv from Walmart. Holes don't match. Went to Best Buy across the street. The mounting plate wouldn't match to any of the TV's they had. Looks as if I'm gonna have to take the plate to a machine shop to have it drilled out to the TV's holes.

Oh, well.

 

I assure you that having holes drilled out is not required. There might be a few different sets of holes on the back of the monitor... Are you looking at the right set?

 

@KD5AXG i just measured my mounting bracket and its roughly 4"x6" which equates to roughly a VESA 100(H)x150(W) pattern... Which is measured in millimeters.

Ask the stores about that VESA mounting Standard before getting the drill out.

 

Well my mack finally started running rough this week and Struggling up hills etc. Most likely injector issues me thinks.

Last check with garage they jad no clue what was wromng yet, so got a spare mack for the week while they decide what they r gonna do

Got an extra day at home which was nice but not really wanted. Got a hp load and headed to new hampshire for monday.

Hopefully things turn around for those struggling of late

 

The TV is 75 x 75 mm. And per Best Buy, is standard for 24" and smaller.

I don't know.

 

I might walk inside and grab that NH load as St. Pete is still not loaded...

 

Injector cups is my guess. Or possibly a full fuel filter bowl.