The plant has a high pressure rinse that you can drive through after your loaded. The water isn't too bad. I've gone through a couple of times but only rinse the tractor. Once I get everything cleaned up, I'm thinking of going all the way through at my last load to rinse off the dust for the day.
The Pneumatic Tanker Thread
Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by Air Cooled, Sep 6, 2016.
Page 4 of 64
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
How stable is that second trailer?
You to take offramps more slow then a regular semi? -
The 1300 engine rpm was originally speced for my little 857 paragon. Was too fast for it I ran it @ 1150 engine for the two weeks I had it. Then someone decided they needed it worse than me late Friday night.
Air Cooled Thanks this. -
It's stable but these things are very top heavy. Yes, I take ramps very slow and gently. A semi is WAY more stable than these 2 axle tractors with a set of top heavy doubles.daf105paccar Thanks this. -
-
Wow. That hose must've been jumping around like a snake on caffeine pills at that RPM. I run this Paragon at 850 for a silo. I can feel a steady flow of product with slight shaking of the hose. At 950 when I put my foot on the hose I can feel a surge and air pockets. The line pressure seems to fluctuate a lot at high RPMs too. Seems to take longer to unload at higher RPMs as well. I can't even imagine running it that high. -
Just don't work for bulkamatic have a buddy that does not a good company
-
Sounds like a common carrier kind of company. -
Here's my set. I'm working on getting them cleaned up but I'm not losing sleep over it. A little here and there will go a long way.
bottomdumpin and scythe08 Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 64