Cascadia Antenna Solutions

Well you dont need 500 + hp in your truck..yrs ago it was done with 300..

 

Well rabbi you say mark is a hell of antenna man and he told me 17" shaft on a mirror mount with about 45 degrees of lean...That to me dont seem to work in my little book of knowledge..

 

Been done with the stuff inside coax..just not been able to get my hands on wide ground straps just yet..

 

Weird how a top load 5 ft will not work but my 10k will at about 59"

 

well the balls are cut off mine look at the top of the motor on a dd15 says it produces 505hp at 1800 rpm...put it on a dyno and it might put 435/440 to the ground... so turning 1500 rpm there's your 300 hp motor... in other words nothing has changed in the statement you posted .........

 

getting my new all chrome stryker 955/450 watt radio sunday night. next buy after that Texas star dx1600.... and yes rabbi I know there's too much ju ju in that 955 to push a 8 pill... not looking too or going to blow up high $$$$ equipment.....

 

you can use the ground wire they sell at wal mart 6" it's 4ga. wire/cable it has the the metal ends which is what you need... you ka nooks are some hard headed people... lmao just screwing with ya. go buy what I told ya 1 ground/wire cable each door... it's not expensive and looks more professional than the braided strap.......some people's kids I tell ya---still lmao

 

wal mart wal mart wal mart they will leave the light on

 

The stuff they sell at Walmart might work okay for a DC ground but not for an RF ground

 

I would have a tendency to agree but did you try it?