It's been a while since I had to load an excavator, where I had to worry about weight distribution. Where is the COG? Is it the cab, or center of rotation?
Thanks guys.
Loading 336F Excavator?
Discussion in 'Heavy Haul Trucking Forum' started by jrscott1970, Nov 1, 2016.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Depends, Will it be stripped of counter weight, will it have bucket and what size.. Center pin of unit for general reference
jrscott1970 Thanks this. -
All I know, it's a new one from CAT PDC Tacoma.That's what I figured, but it never hurts to ask. thanks.
-
No problem, are you lding at a storage place. Like one of the trucking companies that store it for them.. If Gresham, I think they might have a scale there.
-
My dispatch says Cat PDC. Google says Northwest Container Services, it's on the corner of 509 and Taylor Way. the guy answering the phone just says, Hello. one of those you'll get all the info once you get there. .lol would be nice if they have a scale. Loves right here is tight getting off the scale
-
What do you have for a truck and trailer, number of axles etc?
4mer trucker Thanks this. -
7 axle. Coronado with a trail king. It's a typical ATS truck and trailer.
-
The last fully dressed 336 that I moved was 90 k
jrscott1970 Thanks this. -
It's been years since I loaded an excavator. When I was hauling construction equipment it was local in texas and we didn't worry about legal weight distribution. I was doing oil field for a while, then mostly pre fab stuff like buildings and tanks, ac units, ect.
-
It's dispatched at 84k, but add 10% to that right. I learned that on here. .lol
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4