How to disable the stupid on guard system

I sent a message plz let me know if that works for you

 

once I came up to a bridge and the display of the onguard showed a speed of 27 miles/hour for the bridge...........was kinda funny

 

Not on SNBL 2014 Cascadia's... Cruise is disabled when the radar goes down. Probably different programming parameters.

 

Yes it is disabled, but it's an easy fix..if you turn cruise on and off , on and off then back on real fast then hit set it will work as normal don't forget to hit the thank button below

 

tinkering with Safety Systems should be illegal at the least it is unethical.

 

Some "safety" systems, while appearing good on paper, fail to realize the desired outcome and actually prove to be counterproductive to the safe operation of a truck. In those cases, why would you want a law prohibiting the disabling of a "safety" system that actually makes the truck MORE DANGEROUS to drive?

 

I now have experience with this system in my last 2 jobs and with a little different experience. I'm currently with JBH in a 2014 Cascadia pulling 1-3 year old dry van trailers and it works great, smooth and predictable BUT I'm only going 62 mph. Pretty much the slowest vehicle on the road so unless I'm daydreaming i usually have plenty of notice that it's gonna activate and can adjust. When it does activate it's not too harsh.
My first job I had a 2012 ProStar that was un governed and I was pulling a older late 90s car hauler trailer. Now at 72 mph when it activated it would scare the crap out of you. Activated hard enough to set the seat belts. Never locked up the tractor tires but I would leave trailer skid marks so the mention of flat spots I could see on the trailer tires I guess. I didn't have any abs lights on on the tractor instrument panel or the trailer indicating light but that doesn't mean much so I can't be sure that the trailer abs actually worked. I still liked it for the smart cruise but I could easily see it being a issue on faster trucks.

 

Also when it activates and you step on the go go pedal it mostly stops the braking action.
In my trainers truck it was showing a fault code on his screen and it was constantly amber or yellowish but his cruise still worked without any radar info. Think this is very rare cuz if my screen has any faults showing I have no cruise and in any other I've driven that's the case.

 

I unplugged the sensor at the bumper. Everything works just has a "no sensor signal" at startup of truck. Effected nothing else

 

Is there a way to cover up the onguard on this truck where is it, it's not the beeping it's when I come to a bridge or a over head sign it's stops me now I pull doubles and the back one isn't liking this