APU Reset

Discussion in 'International Forum' started by swaggerjacker, Feb 16, 2017.

  1. V c2c

    V c2c Light Load Member

    218
    176
    Aug 16, 2016
    Waco Texas
    0
    Does the APU try 2 start at all? Or is it just the fan not blowing? I have the same unit.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. swaggerjacker

    swaggerjacker Medium Load Member

    400
    450
    Nov 20, 2016
    0
    Right, that's why I asked. Thanks
     
    driverdriver Thanks this.
  4. swaggerjacker

    swaggerjacker Medium Load Member

    400
    450
    Nov 20, 2016
    0
    The APU starts and shuts down properly. The control panel shows a lightening bolt (on the top right) with the word off in-between it. The blower does not blow. It did when the truck was purchased. When I plugged in the vac, the vac started to run, then shut off. But yes, the APU starts and runs well. But the fan does not blow.
     
  5. V c2c

    V c2c Light Load Member

    218
    176
    Aug 16, 2016
    Waco Texas
    0
    Can't remember the signs all. Lighting bolt is the batt monitor. Hourglass is timer. You might check and see if you have the comfort monitor on. If so I know at times it will not let fan blow at all if within the set temperature range. Check your settings
     
    swaggerjacker Thanks this.
  6. swaggerjacker

    swaggerjacker Medium Load Member

    400
    450
    Nov 20, 2016
    0
  7. againstthewind

    againstthewind Road Train Member

    2,027
    3,164
    Oct 26, 2012
    0
    i just had the same issue with a comfort pro after running microwave, showed "off" on display and no fan, blew the generator
     
    Last edited: Feb 24, 2017
    swaggerjacker Thanks this.
  8. againstthewind

    againstthewind Road Train Member

    2,027
    3,164
    Oct 26, 2012
    0
  9. swaggerjacker

    swaggerjacker Medium Load Member

    400
    450
    Nov 20, 2016
    0
    The truck is in Houston. I'm currently in Albuquerque. So not yet. Soon though. Shouldn't the fuse have caught that? Was the fuse blown?
     
  10. againstthewind

    againstthewind Road Train Member

    2,027
    3,164
    Oct 26, 2012
    0
    the 20amp fuse was fine, apu still ran, i thought the fuse was for the fan but im no expert, the 35 amp breaker wasnt tripped so it didnt need to b reset, the generator was replaced under warranty. i was told thats why there was no power being supplied. how its wired i dunno, maybe someone else can chime in here as far as the fuse
     
    Last edited: Feb 24, 2017
    swaggerjacker Thanks this.
  11. swaggerjacker

    swaggerjacker Medium Load Member

    400
    450
    Nov 20, 2016
    0
    Wonder what it would cost to replace a generator. Shudder to think. Thanks for the info.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.