Let me just say when it comes to tucking away excess flap... ROLL it with the bottom bungie hook. If you just fold it up, the excess will have a tendency to slide back out the bottom going down the highway. That goes for both front and rear. Ask me how I know.
Post flatbed load photos here V2.0
Discussion in 'Flatbed Trucking Forum' started by leftlanetruckin, Feb 18, 2014.
Page 991 of 2460
-
Lepton1, cke, DDlighttruck and 5 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
cke, DDlighttruck, johndeere4020 and 2 others Thank this.
-
cke, DDlighttruck, johndeere4020 and 3 others Thank this.
-
I also roll the sides up when I have extra. The roll of material at the bottom on the sides gets trapped better by the bungies and makes a better seal if you can't get a row of D-Rings right near the deck. I run into this mostly using my 8ft drops since the D-rings are on 2 ft centers from the bottom edge.cke, DDlighttruck, MJ1657 and 3 others Thank this. -
johndeere4020 and MJ1657 Thank this.
-
A nice, clean and tight tarp job shows pride in the job. I like that.
kylefitzy, passingthru69, Long FLD and 4 others Thank this. -
Oxbow, SAR, passingthru69 and 6 others Thank this.
-
The MDF team helped on this one. It'll be hammer down at 1AM for Montréal area.
Lepton1, SAR, passingthru69 and 8 others Thank this. -
Oxbow, PeteyFixAll, cke and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 991 of 2460