Overweight Triggers Level III

Discussion in 'Flatbed Trucking Forum' started by Peelsession, Apr 27, 2017.

  1. Peelsession

    Peelsession Light Load Member

    197
    389
    Feb 13, 2016
    Sioux City, IA
    0
    I've been unhappy with my load positioning lately. Never been overweight but too light on the drives for my liking which makes me tail heavy. Crappy handling makes me grumpy.

    So...I've been cheating my loads forward. Bit me today rolling through WA scale.

    When I loaded the day prior, I was contemplating scaling the load at nearest CAT (shipper had no scale). I made the command decision to run it (talked myself into this) because...
    1) nearest scale is Jubitz / Portland / rush hour
    2) shipper is done for the day and wouldn't get reworked until next day

    It felt I was it cutting really close this time on my drives. My dash gauge was right on my max psi and figured I could burn the fuel if I was over. Then I'd just run half tanks and be fine (arrived at shipper with full tanks).

    Hit WA port of entry and nailed for heavy drives 34,560. Steers were fine and spread was under 38k. Officer admits to being "bored" lol. Requests all paperwork and proceeds with level III (cherry popped!)

    No ticket issued. Just a document with all my info, Level III, and violation. "state/local laws-excessive weight". Before he sent me on way he asked how much fuel I had on and said "Make sure you fuel AFTER crossing scales". He was saying this more as advice and not reprimanding me. I certainly wasn't offering any excuses other than I failed to load my trailer properly.

    My first inspection turned out to be pretty painless. Although, if I had done my job properly I may still be inspection free. Now we'll see what my company has to say about it. :eek:

    It's my understanding that CSA points are not awarded for this, and the officer said as much.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Roberts450

    Roberts450 Road Train Member

    2,237
    3,638
    Feb 6, 2016
    0
    With the way this was going I thought this might have been one of the bridgestone guys (there was two trucks running together and talking on the cb) that I followed out of Spokane this morning as he was saying he was over on his drives too but he was headed towards Portland or something like that.
     
  4. cnsper

    cnsper Road Train Member

    5,869
    27,421
    Feb 28, 2014
    0
    I have been waiting for a reason to use this. All in jest...
    [​IMG]
     
    Rugerfan, 1951 ford, Oxbow and 13 others Thank this.
  5. snowman_w900

    snowman_w900 Road Train Member

    4,418
    81,025
    Nov 25, 2010
    0
    If its listed on the inspection in anyway shape or form, even if its just a warning, you still get the points on your CSA
     
    Oxbow, SAR, cke and 4 others Thank this.
  6. Peelsession

    Peelsession Light Load Member

    197
    389
    Feb 13, 2016
    Sioux City, IA
    0
    Yeah, going the other direction this morning. Green lighted through first Montana scale. Few more to go.

    Fixed fifth wheel so did some rearranging and plan on running on fumes I guess.

    IMG_0442[1].JPG
    IMG_0441[1].JPG
     
    bigguns, cke, Crusader66 and 2 others Thank this.
  7. Gunner75

    Gunner75 Road Train Member

    5,701
    9,076
    Mar 17, 2014
    Jackson Center Ohio
    0
    CSA doesn't track overweight violations. So your fine there. Take it as a lesson learned. I know the load center for my trailer, that's where I have then load it. I've played with moving the loads forward but everyone I do I get heavy on my steers. So far the closest I've been able to get it was 1000 lbs lower on the trailer.
     
  8. Bean Jr.

    Bean Jr. Road Train Member

    5,573
    9,929
    Mar 30, 2014
    0
    It has to be a csa violation, which overweight isn't.
     
    Oxbow, cke, Razororange and 3 others Thank this.
  9. Peelsession

    Peelsession Light Load Member

    197
    389
    Feb 13, 2016
    Sioux City, IA
    0
    I know my center as well. Loader barely spoke English and lumber bundles were different sizes. So we started loading from the front and hoped for the best. I'm guessing another foot to rear and I'd be good?
     
    Oxbow, cke, Razororange and 3 others Thank this.
  10. Gunner75

    Gunner75 Road Train Member

    5,701
    9,076
    Mar 17, 2014
    Jackson Center Ohio
    0
    Yeah I would bet a foot back would be good. I usually haul shingles at around 50k per load. I have then start with the center skid and load off there. This is a load at 47k with 17 skids on deck. I'm ok with being heavy on the trailer.
     

    Attached Files:

    cke, johndeere4020 and Peelsession Thank this.
  11. Peelsession

    Peelsession Light Load Member

    197
    389
    Feb 13, 2016
    Sioux City, IA
    0
    Now I'm wondering if this will give the state a reason to pull myself/company in more often. Do you think they'll have this in their "system" that triggers as I roll by next time.

    As I approached scale, signs said follow in cab signal. I have Prepass but was not red lighted. LED signs just lit up to pull in. They apparently had it turned off I guess.
     
    johndeere4020 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.