MXS Hot Codes

Discussion in 'Trucks [ Eighteen Wheelers ]' started by TC30THZ, Nov 25, 2008.

Page 1 of 4
  1. Nov 25, 2008 #1
    TC30THZ

    TC30THZ Bobtail Member

    26
    0
    Nov 21, 2008
    Imler, Pa.
    0
    What is the best injector codes for the MXS? 5232
     
    TC30THZ, Nov 25, 2008
    TC30THZ, Nov 25, 2008
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Nov 25, 2008 #2
    CaterpillarWrench

    CaterpillarWrench Light Load Member

    188
    49
    Nov 11, 2008
    Wrenching feverishly
    0
    Only way you can put injector codes in an MXS is if you have the older ecm on.5232 are good injector codes,6999 are better.MXS ecm has trim files instead of injector codes.We are working on a way to hot trim files in a MXS but not ready yet.
     
    CaterpillarWrench, Nov 25, 2008
    CaterpillarWrench, Nov 25, 2008
    #2
  4. Nov 25, 2008 #3
    TC30THZ

    TC30THZ Bobtail Member

    26
    0
    Nov 21, 2008
    Imler, Pa.
    0
    ok thankyou
     
    TC30THZ, Nov 25, 2008
    TC30THZ, Nov 25, 2008
    #3
  5. Nov 25, 2008 #4
    CaterpillarWrench

    CaterpillarWrench Light Load Member

    188
    49
    Nov 11, 2008
    Wrenching feverishly
    0
    Whats the best mileage you ever got with the PP box?
     
    CaterpillarWrench, Nov 25, 2008
    CaterpillarWrench, Nov 25, 2008
    #4
  7. Nov 25, 2008 #5
    TC30THZ

    TC30THZ Bobtail Member

    26
    0
    Nov 21, 2008
    Imler, Pa.
    0
    Usually average 6.2-6.4, pulling a flatbed 43000-46000
     
    TC30THZ, Nov 25, 2008
    TC30THZ, Nov 25, 2008
    #5
  8. Nov 25, 2008 #6
    Les2

    Les2 Road Train Member

    5,150
    2,288
    Jul 25, 2008
    kicked back in my lazyboy...
    0
    Whats the deal with the crank, any news yet of what they are gonna do?
     
    Les2, Nov 25, 2008
    Les2, Nov 25, 2008
    #6
  9. Nov 25, 2008 #7
    TC30THZ

    TC30THZ Bobtail Member

    26
    0
    Nov 21, 2008
    Imler, Pa.
    0
    Long story, went from the crank, to a cracked flywheel to a shaft broke in the tranny. Good they tore it down, because the main bearings were shot, and they also did the update on the rockers, had the rockers all replaced for nothing. Get the tranny and mains bill tomorrow:biggrin_2555:
     
    TC30THZ, Nov 25, 2008
    TC30THZ, Nov 25, 2008
    #7
  10. Nov 28, 2008 #8
    kennyp

    kennyp Bobtail Member

    4
    0
    Oct 29, 2008
    ca
    0
    hey everyone first post here this is a great site! so what was the outcome this? reason i ask is mine is a bxs with a slight vibration.
     
    kennyp, Nov 28, 2008
    kennyp, Nov 28, 2008
    #8
  11. Nov 28, 2008 #9
    TC30THZ

    TC30THZ Bobtail Member

    26
    0
    Nov 21, 2008
    Imler, Pa.
    0
    It was all tranny related..
     
    TC30THZ, Nov 28, 2008
    TC30THZ, Nov 28, 2008
    #9
  12. Nov 28, 2008 #10
    Les2

    Les2 Road Train Member

    5,150
    2,288
    Jul 25, 2008
    kicked back in my lazyboy...
    0
    Thats where my guess was. But when you said you could turn the front part of the crank and the back half wasn't moving that only leaves one thing.
     
    Les2, Nov 28, 2008
    Les2, Nov 28, 2008
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 4