DD15 engine brake problems

Discussion in 'Freightliner Forum' started by Manock89, Dec 2, 2017.

  1. Manock89

    Manock89 Bobtail Member

    6
    0
    Dec 2, 2017
    0
    I have a 2010 cascadia DD15 when I push the switch on the steering wheel it turns on the light on the dash switch but doesn't activate the engine brake. Any advise on what to try?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. bigkev1115

    bigkev1115 Road Train Member

    2,364
    3,618
    Oct 23, 2009
    Alexandria, AL
    0
    Is your truck manual or automatic?
     
  4. Manock89

    Manock89 Bobtail Member

    6
    0
    Dec 2, 2017
    0
    Its a manual 10 speed Eaton fuller
     
  5. bigkev1115

    bigkev1115 Road Train Member

    2,364
    3,618
    Oct 23, 2009
    Alexandria, AL
    0
    It may be the clutch switch going bad. If the top of your clutch not striking the clutch spring, sometimes the jakes and cruise won t engage until you pull the clutch towards you and it strikes the clutch switch
     
  6. Manock89

    Manock89 Bobtail Member

    6
    0
    Dec 2, 2017
    0
    When I push it in a little with my hand I can hear a click. Is that the clutch switch you are reffering to?
     
  7. bigkev1115

    bigkev1115 Road Train Member

    2,364
    3,618
    Oct 23, 2009
    Alexandria, AL
    0
    It may be. If you look at the top of the clutch pedal, you will see a square switch with about a 3 inch spring coming from it
     
  8. Animosus

    Animosus Heavy Load Member

    732
    2,905
    Dec 7, 2015
    SE Wyoming
    0
    That's not what a clutch switch on a cascadia looks like...

    Does your cruise work? Does it work if you tap the brake pedal?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.