You will have to go to a mod to have them pm me your email, you do not ahve enough postd to pm. The actuator works on pressure.
c15 at 525 setting is still weak to me. help please
Discussion in 'Trucks [ Eighteen Wheelers ]' started by walton379, Nov 22, 2008.
Page 6 of 11
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Air pressure? If so I could rig up a regulator with a pressure gauge. I don't wont to damage the wastegate. What sort of pressure will open the thing?
-
As I posted on other thread,
check your wastgate for sticking cold, also check the pin for wear. I use a coolant pressure tester, put the line to the actuator, pump up the coolant pressure tester, I think the spec on the MBN is around 21 psi measured at .039 movement. Use a dial indicator. Open and close the wasegate and watch to see if it reutrns to 0 each time cold -
well I found my problem. guess I did not look good enough first time. rubber line cracked in the turn on back side. loosing pressure there. thanks for all the help on this issue. this is a great site.
-
what happened to DDS
-
Thats what im trying to find out.
-
fixin to go test this boost problem. just replaced hose.
-
WOW he was here this morning?
-
no more dds wtf?
-
Im trying to find out what happened, i talked to him and he has no clue why he got banned.... Hopefully we get an answer.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 6 of 11