A 2011 International Prostar with a Cummins ISX CM871 yesterday threw a ABS module fault on the ICU. The TC and triangle light is on. I'm going to check the fuse, but in-case it's the ABS module that needs to be replaced does anyone know where it's located so i can remove it? Thanks!
2011 International Prostar ABS module
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by 4vmach1, Oct 6, 2017.
Page 1 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Behind the kick panel in front of the right door and those are wicked expensive. My truck (same specs) will occasionally do the same thing. I disconnect the primary positive battery wire for about 15 minutes, reconnect and it will reboot the module and keep me happy.
FrankPmarrero88 Thanks this. -
Get it scanned for the actual code. The LCD display is just showing which module is reporting the fault. That does NOT mean the actual ABS ECU has gone bad. All those warning lights are normal with simple ABS faults such as wheel speed sensor or circuit problems.
Justrucking2 and GrapeApe Thank this. -
I'm going to try resetting the battery first. This happen after the doc/dpf/egr were deleted. Maybe a parameter got overlooked.
-
I recently had mine deleted and get “42 module” sometimes. But after it’s shut off for a while it apparently resets itself. Is this the same issue you’re having?
4vmach1 Thanks this. -
-
-
Dutchman248 Thanks this.
-
Usually the connector right at the front radar has corrosion in it.
-
Is this thing something the original buyer requested? They weren’t standard equipment were they? I want it gone completely if possible.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 5