No Brake lights 2006 vnl670 need help

switch under brake pedal is used by VECU only (to disable C/C), but brake light input (LCM) is connected to 0.4BAR pressure switch, generally located in brake lines. On FH cabovers they are near battery box, on VN they put it under sleeper. It is 2 pin switch with twist connector, switch is really reliable but connector and wires go bad with road solt.

 

Hi pablo

 

I need your help pablo.where exactly is the break switch located on volvo vnl 670

 

I have been having problems lately with this truck.everytime i stop on a traffic loght my trailer brakes are not releasing

 

Hi Pablo
I having problems with a 2012 Volvo vnl 780 d13.Losing prime and shutting down.Changed filter housing and fuel pump and fuel filters.Now truck runs but needs priming to start.I also checked check valves.Truck will not complete regen.Removed and cleaned 7th injector also.Please advise.Inbox me,Thanks

 

Jaykelz7 check injector cups.

 

it is not all. check fuel lines, fiter unit and fuel delivery pump

how many psi fuel pump builds at idle (hot engine)

 

I had the same problem with my 2011 volvo vhd d13 and the truck won’t running normally; I’ve pulled to the shop and the guys change the 7 injector new and the problem is gone; before doesn’t work regen properly and it was always on ! Cheers from Canada